The most fundamental of solar cell characterization techniques is the measurement of cell efficiency. Standardized testing allows the comparison of devices manufactured at different companies and laboratories with different technologies to be compared.
The standards for cell testing are:
- Air mass 1.5 spectrum (AM1.5) for terrestrial cells and Air Mass 0 (AM0) for space cells.
- Intensity of 100 mW/cm2 (1 kW/m2, also known as one-sun of illumination)
- Cell temperature of 25 °C (not 300 K)
- Four point probe to remove the effect of probe/cell contact resistance
Constructing a system that meets all the above criteria simultaneously is difficult and expensive. Most research laboratories have simple custom-built testers that only roughly approximate the above conditions. Results that are tested "in-house" are typically quite approximate. Periodically companies and research institutions will send devices with record efficiencies to certified testing laboratories for confirmation. Such efficiencies are published as "confirmed efficiencies" along with the name of the test center and the testing date (see appendix).
In the diagram of the IV tester the electronics are shown as all one unit, however, the voltage and current can be measured separately from the power source. Adjusting the height of the lamps rather than the power to the lamps keeps the spectrum constant. However small adjustments to the lamp power are possible without unduly affecting the light spectrum.
IV tester components and Sources of Error
The following pages discuss the individual components of a measurement system and the source of error each component may introduce.